HPE Smart Storage Administrator (HPE SSA) for Windows 64-bit By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement. Watch rambo 4 full movie.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee. | Type: | Software - System Management | | Version: | 2.65.7.0(21 Apr 2017) | | Operating System(s): | | Microsoft Windows 8.1 (64-bit) | | Microsoft Windows Server 2008 R2 | | Microsoft Windows Server 2008 R2 Foundation Edition | | Microsoft Windows Server 2008 x64 | | Microsoft Windows Server 2012 | | Microsoft Windows Server 2012 R2 | | Microsoft Windows Server 2016 | | Microsoft Windows Vista (64-bit) | | Microsoft Windows XP Professional x64 Edition |
Microsoft Windows 7 (64-bit) | | File name: | cp031007.exe (13 MB) |
The HPE Smart Storage Administrator (HPE SSA) is a web-based application that helps you configure, manage, diagnose, and monitor HPE ProLiant Smart Array Controllers and now other storage devices as well, such as host bus adapters (HBAs), HPE Storage controllers, and future devices such as SCSI Express drives, and SAS switch devices. HPE SSA replaces the existing HP Array Configuration Utility, or ACU, with an updated design and will deliver new features and functionality for various Smart Storage initiatives as they come online. HPE Smart Array Advanced Pack 1.0 and 2.0 features are now part of the baseline features of HPE SSA, with the appropriate firmware.HPE SSA will allow you to configure and manage your storage as before, but now with additional features, abilities, and supported devices. Existing ACU scripts should only need to make minimal changes such as calling the appropriate binary or executable in order to maintain compatibility. To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value: | 9c4e659f16f5f7f423016408e1aa0e732ee3baebf503b1bdbeb3bb6db0fecc1d | cp031007.exe |
Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained. Installation:
If there is an older version of HPE SSA installed on the system, please uninstall it by going to 'Control Panel -> Uninstall a program' and then uninstall 'HP Smart Storage Administrator'. Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number. From that drive and directory, execute the downloaded file. Click the 'Install' button to proceed with the installation. The utility will automatically be installed. End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Important:
HPE SSA replaces the existing HP Array Configuration Utility, or ACU, with an updated design and will deliver new features and functionality for various Smart Storage initiatives as they come online. HPE Smart Array Advanced Pack 1.0 and 2.0 features are now part of the baseline features of HPE SSA, with the appropriate firmware. HPE SSA will allow you to configure and manage your storage as before, but now with additional features, abilities, and supported devices. Existing ACU scripts should only need to make minimal changes such as calling the appropriate binary or executable in order to maintain compatibility. Notes:
For support for HPE SSA or Smart Array controllers, please visit Contact HP. Users will automatically be logged out after a predetermined period of inactivity when using HPE SSA and will have to re-login. On the Web-based Management Device Homepage, under 'options', 'Anonymous Access' should be enabled when using HPE SSA. When clicking on a controller that is currently being configured in a different HPE SSA session, a message will appear which allows you to override the other HPE SSA session or cancel. If you choose to override the other HPE SSA session, any unsaved changes in the other session will be discarded. To uninstall HPE SSA, use Add/Remove Programs located in the Control Panel on Windows Systems. To run HPE SSA in local application mode on Windows, Internet Explorer must be the default browser. The following are known issues: - Sometimes the login on the Device Home Page will not work the first time. Click on the Device Home Page link again or refresh the page and re-login.
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. SSA incorrectly displays 64 characters for the encryption master key length in local mode. The length was changed to 32 characters. HPE SSA replaces the existing HP Array Configuration Utility, or ACU, with an updated design and will deliver new features and functionality for various Smart Storage initiatives as they come online. HPE Smart Array Advanced Pack 1.0 and 2.0 features are now part of the baseline features of HPE SSA, with the appropriate firmware. HPE SSA will allow you to configure and manage your storage as before, but now with additional features, abilities, and supported devices. Existing ACU scripts should only need to make minimal changes such as calling the appropriate binary or executable in order to maintain compatibility. Version:4.21.7.0 (5 Oct 2020) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. ADU report does not capture Slotx log greater than 4GiB size if configured. Added support for HPE Smart Array S100i SR Gen10 Plus SW RAID (9 Mar 2020) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Split Mirror Primary Array's Acceleration Mode displays an invalid message that indicates caching can be enabled or disabled for each individual logical drive even if the array does not contain a logical drive that can have caching enabled. (20 Dec 2019) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Added support to enable SmartCache on volumes greater than 256TB
(9 Sep 2019) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Added support for SSD WearGauge reporting for NVMe drives. (2 Apr 2019) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Supports Online Firmware Activation reporting
(27 Nov 2018) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Note: If version 3.30.14.0 was previously installed, then it is not necessary to upgrade to version 3.30.14.0 (A). - Added support for Microsoft Windows Server 2019
(26 Jun 2018) Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
It is recommended to update to this 3.30.13.0 version of HPE Smart Storage Administrator if you update your system BIOS using the 2018.06 version of SPP. Any array created with the BIOS configuration utility from the 2018.06 version of SPP will not be accessible with an older version of HPE Smart Storage Administrator. - Added the ability to enable or disable Drive Write Cache for configured and unconfigured drives
(5 Feb 2018) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Added support for Freeze/Anti-freeze of the Sanitize command.
(12 Jul 2017) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Initial firmware release for HPE P/E-Class SR Gen10 controllers.
(21 Apr 2017) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. SSA incorrectly displays 64 characters for the encryption master key length in local mode. The length was changed to 32 characters. (24 Oct 2016) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Support for:
- Smart Array H240nr
- Smart Array P240nr
- Smart Array P542D
- Added Sanitize Erase for supporting controllers
- Added ability to enable erase and stop erase on multiple drives
- Added support for the Microsoft® Windows Server® 2016 OS.
(1 Apr 2016) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. New features: Support for Drive Sanitize on Smart Array Px2x and Smart Array Px3x controllers Allows users to forcefully re-enable failed encrypted volumes when their encryption keys are permanently lost and all the failed drives have been replaced Added logical drive numbers/physical drive locations to primary and secondary boot volume information
(1 Oct 2015) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Updated HP EULA for encryption licensing (15 Jun 2015) Upgrade Requirement:
Optional The last night free download. - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Support for: New Features: - Transformation support for H-series controllers
- Includes plaintext and rekey operations for Encryption
- NVMe drive support for discovery and Wear Gauge information
- New Solid State device view
(30 Mar 2015) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Support for:
- HP Smart Array P246br
- HP Smart Array P741
- HP Smart Array P841
New Features:
- Parallel Surface Scan
- Encryption Key Manager Authentication
- Express Local Encryption
- Volatile Encryption Keys
- Re-enable Cache Module
- Available only for specific cases where cache is disabled due to battery interruption
(9 Sep 2014) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Support for the following devices: - Smart Array P244br
- Smart Array P440
- Smart Array P440ar
- Smart Array P441
- Smart Array P840
- Dynamic Smart Array B140i
- Smart HBA H240
- Smart HBA H240ar
- Smart HBA H241
- Smart HBA H244br
- 12G SAS Expander
Support for the following new features: - Write-back cache write policy for HP SmartCache
- HDD Flexible Latency Optimization (FLS)
- Power Mode Management
- HBA mode for latest generation Smart Array P-series controllers
- RAID/Array mode for Smart HBA H-series controllers
(18 Feb 2014) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Support for
Smart Array P230i
Smart Array P530
Smart Array P531
Smart Array P830
Smart Array P830i
HP Secure Encryption
Rapid Rebuild Priority
SSD OPO (Over Provisioning Optimization)
512e Physical Drive support
Auto RAID 0
(10 Sep 2013) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Support for:
- Smart Array P430
- Smart Array P431
- Smart Array P731m
- Features supported with appropriate firmware versions and devices as base features (no longer requires SAAP license keys):
- Drive Erase
- Heal Array
- HP SmartCache
- HP SSD Smart Path
- HP SmartSSD Wear Gauge
- Online Expansions and Extensions of Arrays and Logical Drives
- Moving and Deleting of Individual Logical Drive
- Removes previous limitation of having to delete all logical drives in order until target was reache
- Allows moving from one drive type to another.SATA to SAS, SAS to SAT
- Advanced Capacity Expansions
- Split Mirror Backup and Rollback
- Online Mirror Splitting with Recombining in Offline Mode
- Online RAID Migrations
- Online Strip Size Migrations
- Mismatched Drive Firmware Notifications
- Supports following RAID levels as base features (no longer requires SAAP license keys):
- RAID 0
- RAID 1, RAID 1(ADM, Advanced Data Mirroring)
- RAID 10, RAID 10(ADM, Advanced Data Mirroring)
- RAID 5
- RAID 50
- RAID 6
- RAID 60
- Rapid Parity Initialization
- Shrink Array, Move Array, and Replace Array
- Spare Management
- Dedicated (multiple arrays covered by one spare)
- Auto-Replace Drive (spare becomes data replacement drive and covers RAID 0 when set in Predictive Spare Mode)
- Video on Demand (VOD) Performance Optimization
| Type: | Software - System Management | | Version: | 2.65.7.0(21 Apr 2017) | | Operating System(s): | | Microsoft Windows 7 (64-bit) | | Microsoft Windows 8.1 (64-bit) | | Microsoft Windows Server 2008 R2 | | Microsoft Windows Server 2008 R2 Foundation Edition | | Microsoft Windows Server 2008 x64 | | Microsoft Windows Server 2012 | | Microsoft Windows Server 2012 R2 | | Microsoft Windows Server 2016 | | Microsoft Windows Vista (64-bit) | | Microsoft Windows XP Professional x64 Edition |
|
DescriptionThe HPE Smart Storage Administrator (HPE SSA) is a web-based application that helps you configure, manage, diagnose, and monitor HPE ProLiant Smart Array Controllers and now other storage devices as well, such as host bus adapters (HBAs), HPE Storage controllers, and future devices such as SCSI Express drives, and SAS switch devices. HPE SSA replaces the existing HP Array Configuration Utility, or ACU, with an updated design and will deliver new features and functionality for various Smart Storage initiatives as they come online. HPE Smart Array Advanced Pack 1.0 and 2.0 features are now part of the baseline features of HPE SSA, with the appropriate firmware.HPE SSA will allow you to configure and manage your storage as before, but now with additional features, abilities, and supported devices. Existing ACU scripts should only need to make minimal changes such as calling the appropriate binary or executable in order to maintain compatibility. Installation InstructionsTo ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value: | 9c4e659f16f5f7f423016408e1aa0e732ee3baebf503b1bdbeb3bb6db0fecc1d | cp031007.exe |
Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained. Installation:
If there is an older version of HPE SSA installed on the system, please uninstall it by going to 'Control Panel -> Uninstall a program' and then uninstall 'HP Smart Storage Administrator'. Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number. From that drive and directory, execute the downloaded file. Click the 'Install' button to proceed with the installation. The utility will automatically be installed. Release NotesEnd User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Important:
HPE SSA replaces the existing HP Array Configuration Utility, or ACU, with an updated design and will deliver new features and functionality for various Smart Storage initiatives as they come online. HPE Smart Array Advanced Pack 1.0 and 2.0 features are now part of the baseline features of HPE SSA, with the appropriate firmware. HPE SSA will allow you to configure and manage your storage as before, but now with additional features, abilities, and supported devices. Existing ACU scripts should only need to make minimal changes such as calling the appropriate binary or executable in order to maintain compatibility. Notes:
For support for HPE SSA or Smart Array controllers, please visit Contact HP. Users will automatically be logged out after a predetermined period of inactivity when using HPE SSA and will have to re-login. On the Web-based Management Device Homepage, under 'options', 'Anonymous Access' should be enabled when using HPE SSA. When clicking on a controller that is currently being configured in a different HPE SSA session, a message will appear which allows you to override the other HPE SSA session or cancel. If you choose to override the other HPE SSA session, any unsaved changes in the other session will be discarded. To uninstall HPE SSA, use Add/Remove Programs located in the Control Panel on Windows Systems. To run HPE SSA in local application mode on Windows, Internet Explorer must be the default browser. The following are known issues: - Sometimes the login on the Device Home Page will not work the first time. Click on the Device Home Page link again or refresh the page and re-login.
FixesUpgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. SSA incorrectly displays 64 characters for the encryption master key length in local mode. The length was changed to 32 characters. ImportantHPE SSA replaces the existing HP Array Configuration Utility, or ACU, with an updated design and will deliver new features and functionality for various Smart Storage initiatives as they come online. HPE Smart Array Advanced Pack 1.0 and 2.0 features are now part of the baseline features of HPE SSA, with the appropriate firmware. HPE SSA will allow you to configure and manage your storage as before, but now with additional features, abilities, and supported devices. Existing ACU scripts should only need to make minimal changes such as calling the appropriate binary or executable in order to maintain compatibility. Revision HistoryVersion:4.21.7.0 (5 Oct 2020) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. ADU report does not capture Slotx log greater than 4GiB size if configured. Added support for HPE Smart Array S100i SR Gen10 Plus SW RAID (9 Mar 2020) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Split Mirror Primary Array's Acceleration Mode displays an invalid message that indicates caching can be enabled or disabled for each individual logical drive even if the array does not contain a logical drive that can have caching enabled. (20 Dec 2019) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Added support to enable SmartCache on volumes greater than 256TB
(9 Sep 2019) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Added support for SSD WearGauge reporting for NVMe drives. (2 Apr 2019) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Supports Online Firmware Activation reporting
(27 Nov 2018) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Note: If version 3.30.14.0 was previously installed, then it is not necessary to upgrade to version 3.30.14.0 (A). - Added support for Microsoft Windows Server 2019
(26 Jun 2018) Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
It is recommended to update to this 3.30.13.0 version of HPE Smart Storage Administrator if you update your system BIOS using the 2018.06 version of SPP. Any array created with the BIOS configuration utility from the 2018.06 version of SPP will not be accessible with an older version of HPE Smart Storage Administrator. - Added the ability to enable or disable Drive Write Cache for configured and unconfigured drives
(5 Feb 2018) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Added support for Freeze/Anti-freeze of the Sanitize command.
(12 Jul 2017) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Initial firmware release for HPE P/E-Class SR Gen10 controllers.
(21 Apr 2017) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. SSA incorrectly displays 64 characters for the encryption master key length in local mode. The length was changed to 32 characters. (24 Oct 2016) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Support for:
- Smart Array H240nr
- Smart Array P240nr
- Smart Array P542D
- Added Sanitize Erase for supporting controllers
- Added ability to enable erase and stop erase on multiple drives
- Added support for the Microsoft® Windows Server® 2016 OS.
(1 Apr 2016) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. New features: Support for Drive Sanitize on Smart Array Px2x and Smart Array Px3x controllers Allows users to forcefully re-enable failed encrypted volumes when their encryption keys are permanently lost and all the failed drives have been replaced Added logical drive numbers/physical drive locations to primary and secondary boot volume information
(1 Oct 2015) Version:2.20.11.0 (15 Jun 2015) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Support for: New Features: - Transformation support for H-series controllers
- Includes plaintext and rekey operations for Encryption
- NVMe drive support for discovery and Wear Gauge information
- New Solid State device view
(30 Mar 2015) Upgrade Requirement:
Optional Gluemotion 1 2 1. - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Support for:
- HP Smart Array P246br
- HP Smart Array P741
- HP Smart Array P841
New Features:
- Parallel Surface Scan
- Encryption Key Manager Authentication
- Express Local Encryption
- Volatile Encryption Keys
- Re-enable Cache Module
- Available only for specific cases where cache is disabled due to battery interruption
(9 Sep 2014) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Support for the following devices: - Smart Array P244br
- Smart Array P440
- Smart Array P440ar
- Smart Array P441
- Smart Array P840
- Dynamic Smart Array B140i
- Smart HBA H240
- Smart HBA H240ar
- Smart HBA H241
- Smart HBA H244br
- 12G SAS Expander
Support for the following new features: - Write-back cache write policy for HP SmartCache
- HDD Flexible Latency Optimization (FLS)
- Power Mode Management
- HBA mode for latest generation Smart Array P-series controllers
- RAID/Array mode for Smart HBA H-series controllers
(18 Feb 2014) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Support for
Smart Array P230i
Smart Array P530
Smart Array P531
Smart Array P830
Smart Array P830i
HP Secure Encryption
Rapid Rebuild Priority
SSD OPO (Over Provisioning Optimization)
512e Physical Drive support
Auto RAID 0
(10 Sep 2013) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Support for:
- Smart Array P430
- Smart Array P431
- Smart Array P731m
- Features supported with appropriate firmware versions and devices as base features (no longer requires SAAP license keys):
- Drive Erase
- Heal Array
- HP SmartCache
- HP SSD Smart Path
- HP SmartSSD Wear Gauge
- Online Expansions and Extensions of Arrays and Logical Drives
- Moving and Deleting of Individual Logical Drive
- Removes previous limitation of having to delete all logical drives in order until target was reache
- Allows moving from one drive type to another.SATA to SAS, SAS to SAT
- Advanced Capacity Expansions
- Split Mirror Backup and Rollback
- Online Mirror Splitting with Recombining in Offline Mode
- Online RAID Migrations
- Online Strip Size Migrations
- Mismatched Drive Firmware Notifications
- Supports following RAID levels as base features (no longer requires SAAP license keys):
- RAID 0
- RAID 1, RAID 1(ADM, Advanced Data Mirroring)
- RAID 10, RAID 10(ADM, Advanced Data Mirroring)
- RAID 5
- RAID 50
- RAID 6
- RAID 60
- Rapid Parity Initialization
- Shrink Array, Move Array, and Replace Array
- Spare Management
- Dedicated (multiple arrays covered by one spare)
- Auto-Replace Drive (spare becomes data replacement drive and covers RAID 0 when set in Predictive Spare Mode)
- Video on Demand (VOD) Performance Optimization
|
|
